How do I adapt from a beaded to an overlap pool liner?
The beaded pool line can be changed to an overlap pool liner. All you need to do is just add coping on the top of the pool liner and then the bead receiver. On the other hand, you can also change from an overlap pool liner to a beaded pool liner, by just adding the bead receiver to the swimming pool.
How do you get rid of an old pool liner?
Vinyl pool liners and automatic pool covers or solid safety covers made from reinforced vinyl. Scraps of vinyl could be used for covering a wood pile, but if there is no other use for it, you can recycle it – roll it up and put it in your big blue can, or haul it to your local recycling facility.
What holds a pool liner in place?
A coping strip is a piece of plastic that acts like a wide paper clip that runs along the top of your above ground pool wall. Since it “overlaps” the swimming pool wall from the inside, the copingstrip ensures that the liner is held firmly in place.
What is the difference between a beaded liner and an overlap liner?
Beaded aboveground pool liners have a very small groove or lip at the top edge of the liner. An overlap style liner is folded over the wall of the swimming pool and held in place underneath the top rail of the above ground swimming pool.
Can you replace a Unibead liner with a beaded liner?
Unibead pool liners are the ultimate in versatility since you can use it to replace an Overlap Pool Liners as well as Beaded Pool Liners.
How do you tell if you have a beaded pool liner?
If your swimming pool requires a beaded pool liner, you will be able to see this track by looking under the top rail on the inside of the above ground swimming pool. An overlap style liner is folded over the wall of the swimming pool and held in place underneath the top rail of the above ground swimming pool.
When is the best time to install a beaded pool liner?
Here is a guide to help you install a beaded pool liner: Make sure that you install your pool liner on a warm day where the temperature is 75° or more. Drain all of the water out of the pool and remove the old liner.
What kind of pool liners are used for above ground pools?
Beaded swimming pool liners are specifically designed for use with flat bottomed above ground pools. Easy to install and incredibly durable, beaded pool liners make it possible to update the look of your pool instantly.
What kind of bead do I need for above ground pool?
The Standard Bead is the most common bead for above ground pool liners. The Standard Bead provides a nice clean edge at the top of your pool wall. Beaded liners will require a bead receiver track on your pool in order to use.
What’s the best way to replace a pool liner?
Use a sharp utility knife to slice the vinyl into easily-removable pieces and remove them from the pool, then make sure that you remove the liner from its track if it has one to avoid damage. If you have an overlap liner, you’ll also need to take the top rails off. Step 3. Prep the floor