How do you hang a heavy mantle?
Slide Over Bolts Method
- Locate the studs behind the brick, stone, or faux veneer.
- Drive 1/2in lag screws through each of the studs.
- Have a helper support the mantel while you mark the location of the support rods on the back of the beam.
- Apply construction adhesive into the holes.
- Slide into place, admire, and enjoy!
How do you install a wood mantel on drywall?
Holding your drill at a 45 degree angle downward, drill a pilot hole through the shelf and drywall and into the stud. Install a finishing nail into each of the pilot holes with a nail gun or hammer; the nails must be long enough to penetrate at least 1 inch into the drywall. These nails will secure the mantle in place.
How far should a mantle stick out?
The proportions of your mantel in relationship to your fireplace are important. Generally, your mantel should extend a minimum of three inches beyond the opening of your fireplace.
Do you install mantel before or after stone?
It’s best to build the mantel right into the stone, rather than refinishing the fireplace first.
How do you size a mantel?
For a quick calculation on size, make sure that the mantel shelf width divided by 2 is less than the width from the fireplace center to any wall, window, door or shelf. Find the dimensions of the available wall space in order to size a mantel for a room.
How high should a TV be above a mantle?
The rule of thumb is, if your mantel is less than four feet from the floor, you should mount your TV about 12 inches above it. This rule applies to a fireplace without a mantel as well.
How do you remove a floating mantel?
Pound the bottom of the mantel shelf with a rubber mallet to separate it from the wall if it doesn’t release when you pry the base of the mantel away from the wall, advises Fireplace Town. Tap it gently, but with enough force to pull the nails from the wall. Once it’s loosened, pull out on the shelf to remove it.
How far should a mantel stick out?
How to install a mantel on a wall?
How to Install a Mantel. 1 Remove the old mantel. 2 Add support by drilling holes for lag shields, then install lag bolts into the brick. 3 Measure carefully and drill corresponding holes for the wood mantel. 4 Push the wooden mantel carefully into place using wood glue for extra support. 5 Caulk the seam and allow time to dry before using.
How long does it take to install a floating fireplace mantel?
A floating fireplace mantel appears to be protruding directly from the wall without any legs or brackets supporting it. Even a novice do-it-yourself homeowner can install a floating mantel within a few hours. If the floating mantel will be mounted to brick or stone, you will need to use special masonry…
How tall should a mantel be over the floor?
Most mantels are placed about 60″ above the floor. Mark the grout line that is closest to the desired height. Place marks on the grout line every 16″. Make sure those marks are level, centered and extend far enough to cover the mantel’s length.
How to install a heavy wood mantel with lag bolts?
Here are a few additional tips to help you install a heavy wood mantel: Use lag bolts in conjunction with lag shields that are at least 2″ long Add more support by increasing the amount of lag bolts. A good rule of thumb is one bolt every 10 inches. Buy the proper tools. You will need a drill, masonry bit, lag bolts and wood glue.
